Olympus DS-5500 - Using the Hold Function

31
3
EN
Using the hold function
POWER HOLD
Using the hold function
SlidethePOWER/HOLDswitchtothe[HOLD]
positiontoputtherecorderintotheholdmode.
Duringtheholdmode,allbuttonoperationsare
locked.
Notes
• Ifanybuttonispressedduringthehold
mode,currentdateandtimeisdisplayedfor
approximately2seconds.
• IfthePOWER/HOLDswitchissledtothe[HOLD]
positionduringrecordingorplayback,button
operationsarelocked,buttherecordingor
playbackcontinuestotheend.