Olympus DS-5500 - Verbal Comment; Setting a Verbal Comment; Clearing a Verbal Comment

36
3
EN
Index marks
029 / 030
INSERT
SPEED
INDEX
MIKE
3H 10 M 56 s
Index 01
Set
QPDICT Ni
029 / 030
INDEX
MIKE
3H 10 M 56 s
22M 40 s
Index 01
QPDICT Ni
Indexmarkscanbeplacedintoafileduring
recordingorplayback.Indexmarksareusedto
provideaquickandeasywaytoidentifyimportantor
significantpartswithinthefile.
Setting an index mark
1 Whiletherecorderisinrecordingmode
orinplaybackmode,pressthe
F3 (INDEX)button.
• Anindexnumberwillappearonthedisplay
andthestatusindicatorlightwillstart
flashing.
Locating an index mark
2 Whileplayingbackafile,pressandhold
the 9 or 0button.
• Therecorderstopsfor1secondwhenit
reachestheindexmark.
Clearing an index mark
1 Selectafileinwhichindexmarksyou
wanttoerasearecontained.
2 Pressthe9 or 0buttontoselect
theindexmarktoerase.
3 Whiletheindexnumberappearsfor
approximately2secondsonthedisplay,
press the ERASEbutton.
• Theindexmarkiserased.
Notes
• Upto32indexmarkscanbesetwithinafile.
• Whenafileislockedorsettoread-only,orwhen
theSDcardislocked,indexmarkcannotbe
erased.
• IftherecorderhasbeensettoDSSClassicmode,
indexmarksarelimitedtoamaximumof16for
eachfile.
Index marks