Olympus DS-5500 - Setting battery type and time;date; Setting battery type [Battery]; Setting time and date [Time & Date]

20
EN
1
Setting time and date
BACK EXIT
Device Menu
Power Save
12
Time & Date
USB Connect
USB Class
Reset Settings
Format
Setting time and date
Changing the time and date
Ifthecurrenttimeanddateisnotcorrect,setitusing
theprocedurebelow.
1 Whiletherecorderisinstopmode,press
the OK/MENUbutton.
2 Pressthe9 or 0buttontoselect
[Device Menu]tab.
• Youcanchangethemenudisplaybymoving
thesettingstabcursor.
3 Pressthe+ or −buttontoselect
[Time & Date].
4 PresstheOK/MENUbutton.
• ThefollowingstepsarethesameasStep1
throughStep3of“Setting time and date
[Time&Date]”(☞P.18).
5 PresstheF3 (EXIT)buttontoclosethe
menuscreen.