Olympus E-M1 - Attaching the Flash Unit

15 EN
Preparing the camera and fl ow of operations
1
Attaching the fl ash unit
1
Remove the terminal cover from the fl ash unit and attach the fl ash to the
camera.
• Slide the fl ash unit all the way in, stopping when it contacts the back of the shoe and
is securely in place.
2
3
1
2
1
UNLOCK switch
Connector cover
2
To use the fl ash, raise the fl ash head.
• Lower the fl ash head when the fl ash is not in use.
y Cautions
• When not using the accessory port, be sure to attach the cover.
Removing the Flash Unit
Press the UNLOCK switch while removing the fl ash unit.
2
1
UNLOCK switch