46
EN
Basic operations
5
Shooting in scene mode
1
Rotate the mode dial to SCN.
• A menu of scene menu will be displayed. Select a scene
using FG.
• On the scene menu screen, press I to display details
of the scene mode on the camera monitor.
• Press Q or press the shutter button halfway to select
the highlighted item and exit the scene menu.
1 Portrait
Types of scene modes
O Portrait r Nature Macro
P e-Portrait Q Candle
L Landscape R Sunset
K Landscape+Portrait T Documents
J
Sport s Panorama (P. 47)
i
Hand-Held Starlight
(
Fireworks
G Night Scene g Beach & Snow
U Night+Portrait fn Fisheye Effect
G
Children wn Wide-Angle
H
High Key mn Macro
I
Low Key T 3D Photo
q DIS Mode J Panning
J
Macro
2
Shoot.
• To choose a different setting, press Q to display the scene menu.
$ Notes
• When the camera is panned to track a moving subject, [Panning] detects the motion and
limits shutter speed for optimum results. Use for photos of moving objects in which the
background appears to be fl owing past your subject.
• In [Panning] mode, the camera displays J if panning motion is detected and I if it is
not.
y Cautions
• In [e-Portrait] mode, two images are recorded: an unmodifi ed image and a second
image to which [e-Portrait] effects have been applied. Recording may take some time. In
addition, when the image quality mode is [RAW], the image is recorded in RAW+JPEG.
• Movies cannot be recorded in [e-Portrait], [Hand-Held Starlight], [Panorama], or [3D
Photo] mode.
• In [Hand-Held Starlight], 8 frames are shot at one time and then combined. When the
image quality mode is [RAW], a JPEG image is combined with the fi rst RAW image and
recorded in RAW+JPEG.
• [3D Photo] is subject to the following limitations.
[3D Photo] can be used only with a 3D lens.
The camera monitor cannot be used to playback images in 3D. Use a device that
supports 3D display.
Focus is locked. In addition, fl ash and self-timer also cannot be used.
Image size is fi xed at 1920 × 1080.
RAW photography is not available.
Frame coverage is not 100%.
To Next Page
Loading...
