86
EN
Menu functions (Shooting menus)
7
Wireless remote control fl ash photography
You can use the supplied fl ash and a fl ash equipped with the RC mode function to
perform wireless fl ash photography. g “Wireless remote control fl ash photography”
(P. 135)
Digital Zoom (Digital Tele-converter)
Digital Tele-converter is used to zoom in beyond the current zoom ratio. The camera
saves the center crop. Zoom is increased by about 2×.
1
Select [On] for [Digital Tele-converter] in W Shooting Menu 1.
2
The view in the monitor will be enlarged by a factor of two.
• The subject will be recorded as it appears in the monitor.
y Cautions
• Digital zoom is not available with multiple exposures, in J mode, or when T, s, f,
w, or m is selected in SCN mode.
• This function is not available when [Movie Effect] is [On] in n mode.
• When a RAW image is displayed, the area visible in the monitor is indicated by a frame.
• AF target drops.
Keystone correction and perspective control ( Keystone Comp.)
Use keystone correction for shots taken from the bottom of a tall building, or
deliberately exaggerate the effects of perspective. This setting is only available in
P/A/S/M modes.
1
Select [On] for [Keystone Comp.] in W Shooting Menu 1.
2
Adjust the effect in the display and frame the shot.
• Use the front dial or rear dial for keystone correction.
• Use FGHI to choose the area recorded.
• Press and hold the Q button to cancel any changes.
• To adjust exposure compensation and other shooting
options while keystone compensation is in effect, press
the INFO button to view a display other than keystone
compensation adjustment. To resume keystone
compensation, press the INFO button until keystone
compensation adjustment is displayed.
18
mm
3
Shoot.
• To end keystone compensation, select [Off] for [Keystone Comp.] in W Shooting
Menu 1.
$ Notes
• When [D (Keystone compensation)](P. 104) is assigned to a button using [Button Function],
pressing the selected button displays digital shift options.
To Next Page
Loading...
