Olympus E-PM2 User Manual

103 EN
Other
6
Pixel Mapping - Checking the image processing functions
The pixel mapping feature allows the camera to check and adjust the image pickup
device and image processing functions. After using the monitor or taking continuous
shots, wait for at least one minute before using the pixel mapping function to ensure
that it operates correctly.
1
Select [Pixel Mapping] in c Custom Menu (P. 77) tab b.
2
Press I, then press Q.
• The [Busy] bar is displayed when pixel mapping is in progress. When pixel mapping
is fi nished, the menu is restored.
# Cautions
• If you accidentally turn the camera off during pixel mapping, start again from Step 1.

Olympus E-PM2 Specifications

General

Camera Type	Mirrorless
Sensor Type	Live MOS
Sensor Size	17.3 x 13.0 mm (Four Thirds)
Effective Pixels	16.1 Megapixels
Image Processor	TruePic VI
Image Stabilization	Sensor-shift
Lens Mount	Micro Four Thirds
Shutter Speed	60-1/4000 sec
Autofocus Points	35
Continuous Shooting Speed	8 fps
Screen Resolution	460, 000 dots
Touchscreen	No
Max Video Resolution	1920 x 1080
Video Frame Rate	30 fps
Built-in Flash	Yes
Wireless Connectivity	No
Storage Media	SD/SDHC/SDXC
Battery	BLS-5 lithium-ion battery
Battery Life	360 shots
Weight	269 g (with battery and memory card)
ISO Sensitivity	200 - 25600
Autofocus System	Contrast-detect
Screen Size	3.0 inch