Olympus E-PM2 User Manual

12 EN
Preparing the camera and fl ow of operations
1
Inserting and removing cards
1
Loading the card.
• Slide the card in until it is locked into place.
g “Card basics” (P. 105)
# Cautions
• Turn off the camera before loading or
removing the card.
2
Closing the battery/card compartment cover.
• Close the cover and slide the battery/card
compartment lock in the direction shown
by the arrow.
2
1
# Cautions
• Be sure the battery/card compartment cover is closed before using the camera.
Removing the card
Press the inserted card lightly and it will be ejected.
Pull out the card.
# Cautions
• Do not remove the battery or card while the card
write indicator (P. 22) is displayed.
FlashAir and Eye-Fi Cards
Read “Card basics” (P. 105) before use.

Olympus E-PM2 Specifications

General

Camera Type	Mirrorless
Sensor Type	Live MOS
Sensor Size	17.3 x 13.0 mm (Four Thirds)
Effective Pixels	16.1 Megapixels
Image Processor	TruePic VI
Image Stabilization	Sensor-shift
Lens Mount	Micro Four Thirds
Shutter Speed	60-1/4000 sec
Autofocus Points	35
Continuous Shooting Speed	8 fps
Screen Resolution	460, 000 dots
Touchscreen	No
Max Video Resolution	1920 x 1080
Video Frame Rate	30 fps
Built-in Flash	Yes
Wireless Connectivity	No
Storage Media	SD/SDHC/SDXC
Battery	BLS-5 lithium-ion battery
Battery Life	360 shots
Weight	269 g (with battery and memory card)
ISO Sensitivity	200 - 25600
Autofocus System	Contrast-detect
Screen Size	3.0 inch