Olympus E-PM2 User Manual

95 EN
Connecting the camera to a computer
5
5
Connecting the camera to a computer
Connecting the camera to a computer
 Windows
1
Insert the supplied CD in a CD-ROM drive.
Windows XP
• A “Setup” dialog will be displayed.
Windows Vista/Windows 7
• An Autorun dialog will be displayed. Click “OLYMPUS
Setup” to display the “Setup” dialog.
# Cautions
• If the “Setup” dialog is not displayed, select “My Computer” (Windows XP) or
“Computer” (Windows Vista/Windows 7) from the start menu. Double-click the
CD-ROM (OLYMPUS Setup) icon to open the “OLYMPUS Setup” window and then
double-click “LAUNCHER.EXE”.
• If a “User Account Control” dialog is displayed, click “Yes” or “Continue”.
2
Follow the on-screen instructions on your computer.
# Cautions
• If nothing is displayed on the camera screen even after connecting the camera to the
computer, the battery may be exhausted. Use a full-charged battery.
Multi-connector
Smaller
terminal
USB cable
Look for this mark.
USB port
# Cautions
• When the camera is connected to another device via USB, a message will be
displayed prompting you to choose a connection type. Select [Storage].

Olympus E-PM2 Specifications

General

Camera Type	Mirrorless
Sensor Type	Live MOS
Sensor Size	17.3 x 13.0 mm (Four Thirds)
Effective Pixels	16.1 Megapixels
Image Processor	TruePic VI
Image Stabilization	Sensor-shift
Lens Mount	Micro Four Thirds
Shutter Speed	60-1/4000 sec
Autofocus Points	35
Continuous Shooting Speed	8 fps
Screen Resolution	460, 000 dots
Touchscreen	No
Max Video Resolution	1920 x 1080
Video Frame Rate	30 fps
Built-in Flash	Yes
Wireless Connectivity	No
Storage Media	SD/SDHC/SDXC
Battery	BLS-5 lithium-ion battery
Battery Life	360 shots
Weight	269 g (with battery and memory card)
ISO Sensitivity	200 - 25600
Autofocus System	Contrast-detect
Screen Size	3.0 inch