Olympus E-PM2 User Manual

35 EN
Basic operations
2
Choosing a focus target (AF target)
Choose which of the 35 autofocus targets will be used for autofocus.
1
Press the P button (H) to display the AF target.
2
Use FGHI to select the single target display and position the AF target.
• “All targets” mode is restored if you move the cursor off the screen.
• You can choose from the following 4 target types. Press the INFO button and use
FG.
All Targets
Single Target
(Standard size,
small size) Group Target
The camera automatically
chooses from the full set of
focus targets.
Select the focus target
manually. Set the target
size to o (small) to
further limit the focus
position.
The camera automatically
chooses from the targets in
the selected group.
Sequential shooting/using the self timer
Keep the shutter button pressed all the way down to take a series of photos.
Alternatively, you can take pictures using the self timer.
1
Press the jY button (G) to display the direct menu.
2
Select an option using HI and press Q.

Olympus E-PM2 Specifications

General

Camera Type	Mirrorless
Sensor Type	Live MOS
Sensor Size	17.3 x 13.0 mm (Four Thirds)
Effective Pixels	16.1 Megapixels
Image Processor	TruePic VI
Image Stabilization	Sensor-shift
Lens Mount	Micro Four Thirds
Shutter Speed	60-1/4000 sec
Autofocus Points	35
Continuous Shooting Speed	8 fps
Screen Resolution	460, 000 dots
Touchscreen	No
Max Video Resolution	1920 x 1080
Video Frame Rate	30 fps
Built-in Flash	Yes
Wireless Connectivity	No
Storage Media	SD/SDHC/SDXC
Battery	BLS-5 lithium-ion battery
Battery Life	360 shots
Weight	269 g (with battery and memory card)
ISO Sensitivity	200 - 25600
Autofocus System	Contrast-detect
Screen Size	3.0 inch