Olympus E-PM2 User Manual

30 EN
Basic operations
2
Taking panoramas
If you have installed the supplied computer software, you can use it to join pictures together
to form a panorama. g “Connecting the camera to a computer” (P. 95)
1
Select SCN as the shooting mode.
P
A
S
M
A
SCNART
n
SETUP
2
Select [Panorama] and press Q.
3
Use FGHI to choose a pan direction.
4
Take a picture, using the guides to frame the shot.
• Focus, exposure, and other settings are fi xed at the
values for the fi rst shot.
250250 F5.6 38
M
ISO
200
5
Take the remaining images, framing each shot so that the guides overlap with
the previous picture.
[
2
] 250250 F5.6 38
M
ISO
200
[
3
]
Exit Exit
• A panorama may include up to 10 images. A warning indicator (g) is displayed after
the tenth shot.
6
After taking the last shot, press Q to end the series.
# Cautions
• During panorama shooting, the image previously taken for position alignment will not be
displayed. With the frames or other markers for display in the images as a guide, set the
composition such that the edges of the overlapping images overlap within the frames.
$ Notes
• Pressing Q before shooting the fi rst frame returns to the scene mode selection menu.
Pressing Q in the midst of shooting ends the sequence of panorama shooting, and allows
you to continue with the next one.

Olympus E-PM2 Specifications

General

Camera Type	Mirrorless
Sensor Type	Live MOS
Sensor Size	17.3 x 13.0 mm (Four Thirds)
Effective Pixels	16.1 Megapixels
Image Processor	TruePic VI
Image Stabilization	Sensor-shift
Lens Mount	Micro Four Thirds
Shutter Speed	60-1/4000 sec
Autofocus Points	35
Continuous Shooting Speed	8 fps
Screen Resolution	460, 000 dots
Touchscreen	No
Max Video Resolution	1920 x 1080
Video Frame Rate	30 fps
Built-in Flash	Yes
Wireless Connectivity	No
Storage Media	SD/SDHC/SDXC
Battery	BLS-5 lithium-ion battery
Battery Life	360 shots
Weight	269 g (with battery and memory card)
ISO Sensitivity	200 - 25600
Autofocus System	Contrast-detect
Screen Size	3.0 inch