Chapter 3 Installation and Connection of the Workstation
59
OLYMPUS CAPSULE ENDOSCOPE SYSTEM
Installation WMV CODEC
1. Insert the installation CD into the CD-ROM drive. The CD will auto-run, and
the Main menu is displayed.
2. On the Main menu, click “Install WMV CODEC”.
3. The installer will be launched. Follow the instructions on the screen to install
the software.
Uninstalling
1. Select [Start] > [Control Panel]. The control panel is displayed.
2. In the control panel, double-click “Add or Remove Programs”. The “Add or
Remove Programs” screen is displayed.
3. In the “Change or Remove Programs” tab, select the Endo Capsule
software light.
4. Click the “Change/Remove” button and follow the instructions on the screen.
To Next Page
Loading...
