Chapter 3 Installation and Connection of the Workstation
55
OLYMPUS CAPSULE ENDOSCOPE SYSTEM
3.2 Connection of equipment
• Never allow the power plug to become wet. It may result in
an electric shock.
• Confirm that the wall power outlet has adequate capacity.
Failure to do so may cause a fire, or a power failure to all
equipment connected to the same power supply.
• Do not bend, pull, or twist the power supply cable. Equipment
damage, including separation of the power plug and
disconnection of the cable wire, fire or electric shock may
result.
• Do not use extension power supply cables. A fire or electric
shock may result. If the extension of power supply cables is
necessary, please contact Olympus.
• Do not place the power strip on the floor.
Exposure to water and/or dust may cause fire or electric
shock.
• Use only the provided cables. Otherwise, equipment
malfunction may result.
• Be sure to connect the power plug securely. Failure to do so
may prevent the equipment from functioning.
• Use of a power supply with insufficient electrical capacity
may cause the equipment to malfunction.
To Next Page
Loading...
