58
Chapter 3 Installation and Connection of the Workstation
OLYMPUS CAPSULE ENDOSCOPE SYSTEM
3.3 Installation of Endo Capsule software light
Be sure to back up your data before installing Endo Capsule
software light, as a software conflict may occur, requiring you
to reinstall the OS.
System requirements
Main menu
The following software can be installed from the Main menu:
1. Endo Capsule software light
Used to display the capsule endoscope images and to create reports.
2. WMV CODEC
Used to export the capsule endoscope images as movies.
Installation Endo Capsule software light
1. Insert the installation CD into the CD-ROM drive. The CD will auto-run, and
the Main menu is displayed.
2. On the Main menu, click “Install Endo Capsule Software Light”.
3. The installer will be launched. Follow the instructions on the screen to install
the software.
Product ID: d2Ht-mx9e-weVz-Kr7b
Operating system Windows XP Professional (SP1 or SP2)
Windows XP Home Edition (SP1 or SP2)
Processor 1.3GHz or higher (SSE2 required)
Intel Pentium M family or equivalent processor
RAM 512MB or more
Hard disk 10GB of available hard disk space
Color quality settings Highest (32bit)
Screen resolution Over XGA
To Next Page
Loading...
