Olympus GX53 - Page 92

To Previous Page

Distributed by

Manufactured by

Shinjuku Monolith, 2-3-1 Nishi-Shinjuku, Shinjuku-ku, Tokyo 163-0914, Japan

www.olympus-global.com

AX9460 02 Issued in April, 2021

Main Page

Table of Contents3
Introduction7
Safety Precautions8
Nomenclature of Units15
List of Combinable Units16
Basic Operations of the Microscope (Reflected Light Brightfield/Darkfield Observations)20
Reflected Light Brightfield/Darkfield Observation Procedures20
Turning on the Main Switch22
Selecting the Observation Method23
Selecting between the Eyepiece Light Path and the Camera Light Path24
Placing a Sample25
Moving the Sample25
Selecting the Objective26
Focusing27
Removing the Fine Focusing Knob27
Adjusting the Tension of the Coarse Focusing Knob27
Adjusting the Brightness28
When the Reflected LED Light Source Is Combined28
When the Halogen Lamp Housing Is Combined28
When the Mercury Lamp Housing Is Combined28
When the Light Source Is Combined28
Adjusting the Observation Tube29
Adjusting the Interpupillary Distance29
Adjusting the Diopter29
Using the Eye Shades31
Adjusting the Tilting (U-TBI90 Only)31
Adjusting the Aperture Diaphragm (AS)32
Adjusting the Field Diaphragm (FS)33
Using the Filter Sliders34
Observing the Image Using the Mercury Burner35
Various Observation Methods36
Reflected Light Differential Interference Contrast (DIC) Observation36
Reflected Light Simple Polarization Observation37
Reflected Light Brightfield/Darkfield Simultaneous Observation38
Transmitted Light Brightfield Observation39
Transmitted Light Simple Polarization Observation40
Using the Analyzer/Polarizer for Reflected Light Observation41
Using the DIC Slider42
Inserting the DIC Slider42
Adjusting the Prism of the DIC Slider43
Using the MIX Slider for Reflected Light Observation44
Inserting the MIX Slider for Reflected Light Observation44
Turning on the Illumination of the MIX Slider for Reflected Light Observation45
Adjusting the Brightness of the Illumination45
Selecting the Illumination Pattern46
Adjusting the Units for Transmitted Light Observation47
Centering the Condenser47
Tilting of the Illumination Column49
Flipping up the Condenser Holder49
Image Acquisition50
Replacement of Optical Parts51
Replacing the Eyepiece51
Replacing the Objective53
Replacing the Halogen Bulb54
Replacing the Mercury Burner56
Replacing the Filter60
Troubleshooting62
Specifications66
Optical Performance List <<UIS2 Series68
Assembly71
Assembly Diagram71
Assembly Procedures72
Attaching the Light Source72
Attaching the Objective74
Attaching the Revolving Nosepiece74
Attaching the MIX Slider / DIC Slider for Reflected Light Observation77
Attaching the Stage78
Attaching the Observation Tube79
Attaching the Eyepiece79
Connecting Cables80
Connecting the AC Adapter and Power Cord82
Attaching the ND Filter for Darkfield Observation83
Attaching the Illumination Column84
Attaching the Halogen Bulb for Transmitted Light Observation84
Attaching the Lamp Housing for Transmitted Light Observation84
Setting the Filters85
Attaching the Condenser85
Adjusting the Tension of the Condenser Height Adjustment Knob86
Attaching the Scale Slider86
Attaching and Adjusting the Camera Adapter87
Connection with PC87
Preventive Inspection Sheet for Illumination Devices88
Proper Selection of the Power Supply Cord89

Olympus GX53 - Page 92

Table of Contents

Related product manuals