93
IPLEX NX
7-2 Attaching the optical adapter
Attach optical adapters, other than stereo optical adapters, to the scope distal end by following
the procedure described in “3-5 Attaching and removing the optical adapter” (page30).
When the optical adapter is attached to the instrument, the optical adapter is
recognized automatically and the following message is displayed.
Make sure that the name of the optical adapter is correct.
7-3 Observing the measurement area
See also “4-4 Observing the inspection object” (page48) for more information on observing
the measurement area.
Observing the measurement area in the live screen and check that the image is appropriate
for measurement.
To Next Page
Loading...
