83
IPLEX NX
Checking measurement values
6-5 Measurement
1
Measurement
While displaying the spot ranging screen, the live/freeze screen or the view screen
(image recorded in the <BINOCULAR IMAGE>), tap the [MEASURE] button.
The measurement method selection screen is displayed.
1
Select a measurement method.
Select the measurement method to display the measurement screen.
Specify the measurement points or reference points, and confirm the corresponding
points.
Specify the measurement points or reference points in the left image area.
The corresponding points (points in the right image area corresponding to measurement
points or reference points specified in the left image area) are displayed in the right image
area.
Confirm that positions of measurement points or reference points (in the left image area)
are same as positions of corresponding points (in the right image area).
Record the measurement results.
Press the [RECORD] button to record the image with the measurement results.
Exit from measurement.
Tap the [LIVE] button to display the measurement exit confirmation dialog. And select
<YES> to exit from stereo measurement. Select <NO> to return to the measurement screen.
Or select <EXIT MEASUREMENT> in the measurement menu screen and select <EXECUTE>
to exit the stereo measurement and return to the screen before the stereo measurement is
activated. Select <CANCEL> to return to the measurement screen.
3
4
· Acquire multiple images with different view points, and measure them.
· Make sure that the measurement area is not blurred on the acquired image.
· If the image is being zoomed on the view screen, the measurement is not available.
· Still images acquired by PRINT SCREEN cannot be measured.
· Still images acquired by the external inputting device cannot be measured.
· The still images recorded in the <MONOCULAR IMAGE> cannot be measured.
The measurement values must be checked before and after measurement.
See “6-3 Checking measurement values” (page78) for details about operations.
To Next Page
Loading...
