57
IPLEX NX
Select the strings in the preset title list registered in advance.
5
After the still image is recorded, the movie recording confirmation dialog appears.
Select <YES>.
The recording of the movie and the sound start. The red circle icon blinks on the LCD
monitor while the movie recording is in progress. If you select <NO> in the movie recording
confirmation dialog, only the still image is recorded and the movie is not recorded. If you
select <CONTINUE> in the movie recording confirmation dialog, the movie is added to the
movie that was recorded last and is recorded. For details, refer to “4 Appending the movie”.
Press the [RECORD] button to exit the movie recording.
The blinking of the red circle icon disappears when the movie recording is complete.
· If <OFF> is set in the <FILE NAME MARK> menu, Step 3 to 5 is skipped.
· Never attempt to insert or remove the SDHC card while the data recording is in
progress. Otherwise, the recording stops and an error message appears on the
display.
· The movie recording stops automatically whenever the SDHC card becomes full or
when the file size reaches 4 GB. An empty 4 GB SDHC card has enough capacity to
record approximately 90 minutes.
6
7
8
You can append the movie to the movie that was recorded last.
Selecting <CONTINUE> in the movie recording confirmation dialog enables to add the movie
to the movie that was recorded last. If the SDHC card is inserted or removed, or the [VIEW]
button or the [THUMBNAIL] button is tapped, or the folder is changed between the image
recording folder and the playback folder, <CONTINUE> cannot be selected.
4
Appending the movie
To Next Page
Loading...
