89
IPLEX NX
Modifying the point
To correct the position of the measurement points or reference points (left image area), or
corresponding points (right image area), select <MODIFY> in the measurement menu.
Tap the <LEFT IMAGE> to correct the measurement points or reference points, or tap the <RIGHT IMAGE>
to correct the corresponding points.
Next, select a point to be corrected by tapping the up/down/left/right button (
Next, select a point to be corrected by tapping the up/down/left/right button (
) and
tup the [ENTER] button to fix it.
Then move the point by tapping the up/down/left/right button (
Then move the point by tapping the up/down/left/right button (
) and tup the
[ENTER] button to fix the position. If you tap the [MENU] button before tapping the [ENTER]
button, the correction is canceled.
<MODIFY> menu
To Next Page
Loading...
