Olympus MX61L - Glare Prevention Control Commands; 1 FPV Commands for Glare Prevention

35
Cube Status Check
1CUBE?
Functions
1. Checks the current status of the cube (mirror unit) in the optical axis.
Command descriptions
The cube that is engaged in the
optical axis.
n: 1 = BF (Optional cube)
2 = DF
1CUBE?
Command Type Description Response Result Description
Query Check of the
current status of
the cube en-
gaged in the
optical axis.
1CUBE n Successful
1CUBE !,E01150 Error A string is sent after “1CUBE? ”.
*
)
“ ” represents a space.
Line feed command <CR><LF> is required after commands and line feed command <CR><LF> are added after any
response.
Command Type Description Response Result Description
Unit Presence
1UNIT?
Functions
1. Checks if units are connected to the MX61/61L.
Command descriptions
1UNIT? Query Check the
connected
units.
1UNIT P0,P1,P2 Successful The P0, P1 and P2 units are con-
nected. (See table below.)
1UNIT !,E01150 Error A string is sent after “1UNIT? ”.
Response parameters
Parameter No. String Strings specifying the unit
P0 MX2 System ID. This is always present.
P1 RV2 U-D5BDREMC/U-P5REMC
RV3 U-D6REMC
None Nosepiece not connected.
P2 HS U-HSTR2 is present.
None U-HSTR2 not connected.
*
)
“ ” represents a space.
Line feed command <CR><LF> is required after commands and line feed command <CR><LF> are added after any
response.