Olympus MX61L - Default Chapter; Table of Contents

MX61/MX61L
IMPORTANT – Be sure to read this section for safe use of the equipment. –
1-7
1 NOMENCLATURE
8-10
2 ASSEMBLY
11-24
2-1 Assembly Diagram ........................................................................................................................................................................... 11
2-2 Detailed Assembly Procedures ........................................................................................................................... 12-22
2-3 Modules Installed by Olympus ............................................................................................................................ 23-24
1 Transmitted Light Module (MX-TILLA/TILLB)
2 (Optional) Light Path Setup
3 Reflected Neutral Density Filter (ND 0.5)
3 CENTRATION OF THE MERCURY/XENON BURNER
25-26
4 MICROSCOPE CONTROL FROM COMPUTER
27-37
CONTENTS
6 MAINTENANCE PART LISTS
39
PROPER SELECTION OF THE POWER SUPPLY CORD ............................................................ 40-41
5 EXTERNAL CONTROL OF REVOLVING NOSEPIECE
38
1 Connector Used 2 Pin Layout and Signal Names
3 Control Specifications
4 Revolving Nosepiece Position Numbers (Index Nos. on the Center of Revolving Nosepiece)
1 RS-232C Communication Parameters 2 Connection of the RS-232C Cable
3 Connection of Connectors and Pin Assign
4 Communication Specifications
5 Command List 6 Command Details
7 Error Code List