12
Important Information — Please Read Before Use
High definition LCD monitor OEV261H
Outline
The 26 inch OEV261H LCD display panel has been designed for use as a
medical monitor. The OEV261H is an LCD monitor designed to be used with
Olympus endoscopes, light sources, video system centers, camera control units
and ultrasound centers. Do not use the monitor for any other purpose.
Designed for medical applications
• Complies with IEC 60601-1 (Ed.2 and 3) and IEC 60601-1-2 (Ed.3)
• Sheet switches and the protective screen panel have been specifically
designed for use in the medical field.
WUXGA (1920 × 1200 pixels) high-resolution IPS LCD panel
10-bit 3DLUT (look-up-table) for accurate color reproduction
10-bit signal processing for smooth color transitions
Instant output of input signals
• The OEV261H incorporates a function that eliminates time delay of field
units caused by IP conversion minimizing delays between input and
image display.
Supports multiple formats
• Capable of handling SDI (both HD and SD), VIDEO, Y/C, YP
B
P
R
/RGB
and DVI-D video input signals.
• Supports both NTSC and PAL TV systems.
• It supports computer (COMP) input signals such as analog signal input
via RGB and HD15 terminals as well as digital signal input via DVI-D
terminal.
A host functions
• PIP (Picture in Picture) and POP (Picture out Picture) dual screen display
functions
• ENDOSCOPE, 1.8,1.95, 2.0, 2.2, 2.4, 2.6, and PACS gamma
• Upside-down (180° rotation) and reverse (flip horizontal) functions
• GPI and RS-232C external control functions
To Next Page
Loading...
