44
Chapter 6 Submenu Operations
High definition LCD monitor OEV261H
Chapter 6 Submenu Operations
6.1 INPUT CONFIG
Use to select (INPUT tab) in the tabs and press to open the INPUT
CONFIG submenu to make the desired settings.
Use to move the cursor up and down. Pressing when the cursor is at
the top changes the cursor back to the tab selection. Pressing when the
cursor is at the bottom moves the cursor to the top.
Subsequent operations differ, depending on the selected submenu item.
Selecting an item for which a value has been set
1.
Press [ENTER] and the set submenu setting turns green.
2. Use to change the set value.
Use [ENTER] to confirm the change; the submenu selection screen
reappears.
Use [MENU] to cancel the change; the submenu selection screen
reappears.
To Next Page
Loading...
