Olympus OEV261H - 6.10 Control

Chapter 6 Submenu Operations
73
High definition LCD monitor OEV261H
6.10 CONTROL
Use to select (CONTROL tab) in the tabs and press to open the
CONTROL submenu and make the desired settings.
Use to move the cursor up and down. Pressing when the cursor is at
the top changes the cursor back to main menu tab selection. Pressing when
the cursor is at the bottom moves the cursor to the top.
Operation
1.
Press [ENTER] and the set submenu setting turns green.
2. Press to select and then use to change the set value.
Use [ENTER] to confirm the change; the submenu selection screen
reappears.
Use [MENU] to cancel the change; the submenu selection screen
reappears.