46
Chapter 6 Submenu Operations
High definition LCD monitor OEV261H
6.2 COMP.
Selecting COMP. in INPUT CONFIG submenu opens the following menu.
Use to move the cursor up and down. Pressing when the cursor is at
the top changes the cursor back to the tab selection. Pressing when the
cursor is at the bottom moves the cursor to the top.
Operation
1.
Use to select a set item and press or [ENTER].
2. Use to change the set value.
Use [ENTER] to confirm the change; the submenu selection screen
reappears.
Use [MENU] to cancel the change; the submenu selection screen
reappears.
∗ This menu is enabled only in single screen display during COMP. input.
∗ These settings are used for each RGB-COMP. and HD15 input terminal.
To Next Page
Loading...
