62
Chapter 6 Submenu Operations
High definition LCD monitor OEV261H
6.6 SYSTEM CONFIG
Use to select (SYSTEM tab) in the tabs and press to open the
SYSTEM CONFIG submenu and make the desired settings.
Use to move the cursor up and down. Pressing when the cursor is at
the top changes the cursor back to the tab selection. Pressing when the
cursor is at the bottom moves the cursor to the top.
Operation
1.
Press [ENTER] and the set submenu setting turns green.
2. Use to change the set value.
Use [ENTER] to confirm the change; the submenu selection screen
reappears.
Use [MENU] to cancel the change; the submenu selection screen
reappears.
MODE7 Magnifies special area 2 (1280 × 1008) of an HD signal to vertical panel size (1200).