Olympus OEV261H - SYSTEM CONFIG

Chapter 5 Screen Menu and Operation of Front Panel
43
High definition LCD monitor OEV261H
When signals other than the above mentioned are input, “UNSUPPORT
SIGNAL” is displayed.
Input terminal
Signal format
Display
VIDEO/
Y/C
SDI1/SDI
2
YP
B
P
R
RGB
RGB-CO
MP./HD15
DVI-D1/D
VI-D2
(VIDEO
signal)
DVI-D1/D
VI-D2 (PC
signal)
NTSC NTSC {
PAL PAL {
480/59.94i 480/59.94i {{{
480/59.94p 480/59.94p {{ {
576/50i 576/50i {{{
576/50p 576/50p {{ {
720/59.94p 720/59.94p {{{ {
720/60p 720/60p {{{ {
1080/50i 1080/50i {{{ {
1080/50p 1080/50p {{
1080/59.94i 1080/59.94i {{{ {
1080/60i 1080/60i {{{ {
1080/59.94p 1080/59.94p {{
1080/60p 1080/60p {{
VGA: 640 × 480 (60 Hz) 640 × 480 (60 Hz) {{
SVGA: 800 × 600 (60 Hz) 800 × 600 (60 Hz) {{
XGA: 1024 × 768 (60 Hz) 1024 × 768 (60 Hz) {{
WXGA: 1280 × 768 (60 Hz) 1280 × 768 (60 Hz) {{
SXGA: 1280 × 1024 (60 Hz) 1280 × 1024 (60 Hz) {{
UXGA: 1600 × 1200 (60 Hz) 1600 × 1200 (60 Hz) {{
WUXGA: 1920 × 1200
(60 Hz)
1920 × 1200 (60 Hz)
{
∗1
{
Table 5.1
∗1: Only compatible with VESA (Video Electronics Standards Association)
Reduced Blanking (Clock: 154 MHz, Hsync: positive logic, Vsync: negative
logic).