4
2. Wipe the portions other than lenses with a dry soft cloth. If the dirt cannot be removed by dry-wiping, moisten a soft
cloth with diluted neutral detergent and wipe the dirty surface with it.
Do not use the organic solvents because they may deteriorate the coated surface or plastic parts.
3.
After using this pr
oduct, set the main switch to
(OFF), wait until the lamp housing is cooled down sufficiently, and
keep it covered with a dust cover during storage.
4. When disposing of this product, follow the regulations and rules of your local government. Contact Olympus for any
questions.
To Next Page
Loading...
