Olympus UCR - Page 21

1.2 Optional items
15
UCR INSTRUCTION MANUAL
Ch.1
The wrench is supplied for installation of the unit by an Olympus sales representative or service
engineer only.
The wrench should be returned to Olympus directly after installation.
 Low flow gas tube (MAJ-1742),
Extra low flow gas tube (MAJ-1816)
Low flow gas tube (MAJ-1742),
Extra low flow gas tube (MAJ-1816)
 Cylinder hose for UHI-3 (PIN, MAJ-1080)
*1
*1 The endoscopic CO
2
regulation unit is compatible with the cylinder hose for UHI-3 (MAJ-1080).
Hose for cylinder Cap Wrench Replacement procedure
for packing (O-ring)