46
5.2 Operation flow
UCR INSTRUCTION MANUAL
Ch.5
See the operation workflow in Figure 5.1 below. Follow each step of the workflow for using the
endoscopic CO
2
regulation unit.
5.2 Operation flow
1
Place the endoscopic CO
2
regulation unit and connect all
ancillary equipment.
Chapter 3 on page 25
2
Inspect the endoscopic CO
2
regulation unit.
Chapter 4 on page 35
3
Turn the endoscopic CO
2
regulation unit ON.
on page 47
4
Select the gas supply source.
on page 47
5
Select the timer setting.
on page 48
6
Operate the endoscopic CO
2
regulation unit.
*1
Section 5.4 on page 49
*1 When using the lens cleaning sheath, follow the instructions given in the manual for the
lens cleaning sheath.
7
After examination, remove CO
2
gas remaining inside the
endoscopic CO
2
regulation unit and turn it OFF.
Section 5.5 on page 50
8
Reprocess and store the endoscopic CO
2
regulation unit after
use.
Chapter 6 on page 53
To Next Page
Loading...
