Page 38 of 76
Issue 20 : July 2012
WM--P1 SERIES WORKSTATIONS
Item Description Part No Qty
Torque
Remarks
90 SPARE
91 NUTM8DOMEDNATURALNYLON .................. K10006640 1 -- DP1
92 SPACER18MMODx8.2MMIDx5MMLG ............. K10006641 1 -- DP1
93 LIMITER--FRONT(MAJ--181)...................... K10007121 1 -- DP1, Y
94 LIMITER REAR (MAJ--181) ......................... K10007122 2 -- Y
95 SCREWM8x50SKTCAPHD ...................... 3050998 2 -- Y
96 PAINT -- WHITE KEYMED SPEC 74 .................. K10006564 400ML -- --
97 PAIN T -- LILAC KEYMED SPEC 76 ................... K10006565 400ML -- --
REMARKS
A Tighten to 4Nm when used to secure item 15, Support Top T ray. Ref figure 6--1
B Tighten to 6Nm when used to secure item 25, Water Bottle Bracket. Ref figure 6--3
C Supplied in ACCESSORY KIT WM--NP1 100V JP K10004488
D Supplied in ACCESSORY KIT WM--NP1 100V--120V US K10004489
E Supplied in ACCESSORY KIT 1332 WM--WP1 100V JP K10004498
F Supplied in ACCESSORY KIT 1333 WM--WP1 110--120V US K10004499
G Supplied in ACCESSORY KIT FOR WM--WP1 UK,EU,ROW K10004466
H Supplied in REAR PANEL KIT WM--NP1 K10005044
J Supplied in REAR PANEL KIT WM--WP1 K10005045
L Supplied in FREE CASTOR KIT -- WM--P1 SERIES ( NON A/S ) K10004627
M Supplied in BRAKED CASTOR KIT ( NON A/S ) K10004626
N Used on WM--NP1 A/S & WM--WP1 A/S ( and all UK after Oct 07)
P Used on WM--NP1 220--240V EU--A/S & WM--WP1 220--240V EU--A/S (and all UK after Oct 07)
R Supplied in MAJ--198 WM--NP1 SHELF KIT (NARROW) K10001429
S Supplied in MAJ--199 WM--WP1 SHELF KIT (WIDE) K10001430
T Supplied in CASTOR BRAKED KIT WM--P1 SERIES A/S K10005040
U Supplied in CASTOR FREE KIT WM--P1 SERIES A/S K10005041
V Supplied in REMOTE SWITCH KIT WM--P1 SERIES K10005049
W Supplied in UMIBILICAL/CAMERA HEAD HOLDER KIT K10006648
Y Supplied in LIMITER -- MOVEMENT ( MAJ--181 ) K10007108 Contents :--
93/1LIMITERFRONT(MAJ--181) .................... K10007121
93/2LIMITERREAR(MAJ--181)...................... K10007122
93/3SCREWM8x50 .............................. 3050998
93/4WASHERCRINKLEM8 ......................... K3920997
93/5WASHERM8................................. 3920372
93/6 INSTRUCTIONS LIMITERS FOR MAJ-- 181 ........... K10008095
Z Early models of WM--NP1 were fitted with a ’Support Top Tray’ ( item 15). On later models a redesigned top tray reduced
the support required to; 2, PLATES SUPPORT WM--DP1, item 10, p/no K10006102.
The early model top tray is no longer available and a current top tray and plates support must be used. The ’Support Top
Tray’ ( item 15) cannot be used and should be discarded.
AA Oct 2007 -- all UK workstations now supplied fitted with antistatic castors.
BB Refer to Chapter 6.6 for torque tightening figures.
NS Not Shown
To Next Page
Loading...
Need help?
General
