Olympus WM-NP2 User Manual

Preparation for Use
MOBILE WORKSTATION WM-NP2
38
7. Reposition the intermediate shelves and secure it (refer to 4.3 Repositioning of shelves).
8. Referring to Figure 4.12, slide the M8 T-nuts to their new positions. One is set at 50mm lower
from the intermediate shelf. The other is set further 50mm lower.
NOTE
T-nuts are best moved using an aid such as an Allen key or small
screwdriver to manoeuvre up and down in the slot in the ‘hoop’.
9. Referring to Figure 4.13, check the positions of the six tabs, four slots and one spring plunger
and then unlock the drawer unit using the supplied key.
Figure 4.12
Figure 4.13
M8 T-nut
50mm
50mm
Spring plunger
Folded tabs
Fixing slots
Unlock before assembly

Olympus WM-NP2 Specifications

General

Brand	Olympus
Model	WM-NP2
Category	Desktop
Language	English