EasyManua.ls Logo

Omega DP20 - Page 25

Omega DP20
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
25
DP20 Economical Multisignal meter Instruction Manual
Setpoint
Hysteresis
Alarm typeAlarm 2
1.30 Full conguraon menu (cont.)
Degrees
degrees Celsius
degrees Fahrenheit
Temperature
resoluon
1º resoluon
0.1º resoluon
Second scaling
Decimal point
Display Low
Display High
‘Eco’ mode
5 to 255 seconds
Average lter
0 to 100
Steps
Oset reading
Opon 1
analog output
relay
disabled
Tools
Modbus RTU
the parameter ‘420’ gives
access to the calibraon
menu for the analog out-
put. See secon 2.2 for
more informaon.
Key UP
(fast access)
Memory of
maximum
Memory of
minimum
Setpoint 1
Setpoint 2
tArE
Tare funcon
Memory of
minimum
Display hold
Memory of
maximum
External control
Decimal point 1
Decimal point 2
Decimal point 0
Second scaling
Decimal point 3
Disabled
tArE
Tare funcon

Other manuals for Omega DP20

Related product manuals