EN
22
Electronic version
General information
Terminals Omnicomm Optim are onboard equipment designed
to gather information on a vehicle status and transfer the data to
Omnicomm Online cloud service or a third-party software.
Main functions:
• Detection of a vehicle location, speed and travel direction
• Active GPS/GLONASS jamming detection
• Active GSM jamming detection
• Reading and ltering of measurements from fuel level sensors and
a broad range of the connected equipment
• Remote control of the connected auxiliary equipment
• Data storage in non-volatile memory
• Data transfer to Omnicomm Online or any third-party software
Technical specications
Table 1.
Specication Value Notes
General information
Overall dimensions 101,0 х 91,0 х 31,3
mm
Ingress protection rating IP52 According to NEMA
IEC 60529
2 SIM cards support Available
SIM-chip support Available Optional
To Next Page
Loading...
