Omnicomm Optim 3.0 - Inserting SIM-Card and Micro SD-Card

EN
29
Electronic version
The best place to install the GSM antenna is the VH windshield or the
internal side of VH plastic front panel.
Inserting SIM-card and micro SD-card
Before you insert a SIM-card:
• Disable the PIN-code request which shows up upon switching
on. To do this, insert the card into any mobile phone and disable
the PIN-code request according to the operation manual of the
telephone
Installation procedure of SIM-card No.1 :
• Using any pointed object, push the button located on the side
of connectors. The SIM-card tray will pop out on the side of
connectors. The SIM-card tray will pop out
• Remove the SIM-card tray from the slot and place the SIM-card
with the contacts facing up
• Reposition the tray with the SIM-card into the slot
Installation procedure of SIM-card No. 2 and micro SD-card:
• Open the Terminal’s case
• Insert the SIM-card and the micro SD-card into the appropriate
slots
• Close the case