Omnicomm Optim 3.0 - Operating Conditions

EN
26
Electronic version
Specication Value Notes
The maximum
instrumental error in
measurements:
the coordinates in the
plan
altitude
the speed
3 m
5 m
0,05 m/sec
“Cold” start 35 sec max With 130 dBm signal
level
“Hot”start 4 sec max With 130 dBm signal
level
Antenna type External, SMA connector
Omnicomm Optim contains the following amount of precious and
non-ferrous metals: gold lower than 0.0001 g, copper lower than
30 g, nickel lower than 0.001 g, brass lower than 30 g.
Operating conditions
The Terminal is designed to operate under the following conditions:
• enclosed explosion-safe premises without aggressive vapors and
gases
• ambient temperature from - 40 to + 85 °С
• upper limit of relative humidity is no higher than 80 %
at 35 °С and at lower temperatures without moisture
condensation
• atmospheric pressure is from 84 to 106.7 kPa