Omron 3G3RX2 Series User Manual

4 DriveProgramming Editor
4 - 4
DriveProgramming User’s Manual (I622-E1)
In the [New Drive] dialog box, you set the connection type for the CX-Drive and the inverter.
Under the [Connection Type], select [Direct] and click the [Settings] button to the right.
On the [Driver] tab page, set the [Port Selection] to the port name of the computer on which the
CX-Drive is installed.
After setting these items, click the [OK] button and close all dialog boxes. The new project is registered
in the workspace.

Omron 3G3RX2 Series Specifications

General

Brand	Omron
Model	3G3RX2 Series
Category	Inverter
Language	English