127
CQM1-SRM21-V1 Master Unit for CQM1 PLCs Section 4-4
Alarm Output Specifications
!Caution For conformance to the EC Directives (Low-voltage Directives), provide rein-
forced insulation or double insulation for the power source that is used for the
alarm output.
Dimensions The following diagram shows the dimensions of the CQM1-SRM21-V1 Master
Unit. All dimensions are in mm.
Note Refer to the CQM1 Operation Manual (W226) for details on the dimensions
when the Master Unit is installed.
Item Specification
Maximum switching capacity 2 A (24 V DC)
Minimum switching capacity 10 mA (5 V DC)
Relay type G6D-1A
Minimum ON time 100 ms (Outputs are ON at least 100 ms.)
Circuit configuration
Internal
circuitry
2 A, 24 V DC max.
CQM1-SRM21-V1
(When the cover is removed)
SGM21-V1
110
32 107
To Next Page
Loading...
