284
Water-resistant Terminals Section 5-4
SRT2–OD08CL, SRT2-OD08CL-1
Note For details on the communications cable, I/O power supply, and I/O wiring,
refer to Communications Cable, I/O Power Supply, and I/O Wiring on
page 275 under 5-4-1 SRT2-ID
@@
CL (-1) Water-resistant Terminals with 4 or
8 Transistor Inputs.
5-4-3 Shielded Connector Wiring and Assembly
Connect external I/O power supply and I/O Units to Water-resistant Terminals
through Shielded Connector (round Water-resistant connectors). Water-resis-
tant Terminals has a male plug for the external power supply connector and a
female socket for the I/O connector. Select ones from the following XS2-series
Round Water-resistant Connectors according to the I/O power supply method
or the I/O Unit.
Mounting dimensions
Three, 5.3 dia. or M5 holes
(Unit: mm)
10
To Next Page
Loading...
