295
Sensor Terminals Section 5-5
5-5-2 SRT@-OD08S Sensor Terminal with 8 Transistor Outputs
Specifications The following tables show the ratings and output specifications for the SRT@-
OD08S.
Ratings
Note The current consumption is the value when all points are OFF, excluding the
current consumption of the external sensor connected to the Sensor Terminal
inputs and the current consumption of the load connected to the Sensor Ter-
minal outputs.
Output Specifications
Item Specification
Models SRT1-OD08S
SRT2-OD08S
Output points 8 points
Communications mode SRT1-OD08S: High-speed Communications Mode
SRT2-OD08S: High-speed Communications Mode or
Long-distance Communications Mode
Power supply type Local power supply
Communications power
supply voltage
(including I/O power sup-
ply)
20.4 to 26.4 V DC (24 V DC
+10%
/
–15%
)
(Power can be supplied from the communications cable)
I/O power supply current 2.4 A max.
Current consumption
(See note.)
50 mA max. at 24 V DC
Noise immunity ±1.5 kVp-p a pulse width of 0.1 to 1 µs and a rise time of
1 ns (via impulse noise simulator)
Vibration resistance 10 to 55 Hz, 1.5 mm double amplitude
Shock resistance
Malfunction: 200 m/s
2
(approx. 20G)
Destruction: 300 m/s
2
(approx. 30G)
Dielectric strength 500 V AC (between insulated circuits)
Ambient temperature Operating: 0 to 55°C
Storage: –20 to 65°C (with no icing or condensation)
Ambient humidity Operating: 35% to 85% (with no condensation)
Storage: 25% to 85% (with no condensation)
Operating environment No corrosive gases
Mounting method M4 screws or 35-mm DIN track mounting
Mounting strength 50 N
Track direction: 10 N • m
Terminal strength Pulling: 50 N
Tightening torque: 0.6 to 1.18 N • m
Excluding strength of connector lock
Node number settings The node number is set on a DIP switch. (Set the node
number before turning ON the Slave.)
Weight 100 g max.
Item Specification
Output current 0.3 A max./point
Residual voltage 0.6 V max.
Leakage current 0.1 mA max.
ON delay time 0.5 ms max.
OFF delay time 1.5 ms max.
To Next Page
Loading...
