308
Analog Input Terminals Section 5-7
5-7 Analog Input Terminals
5-7-1 SRT2-AD04 Analog Input Terminal
Note Do not connect the Analog Input Terminal to any of the following incompatible
Master Units or incorrect data may be transmitted.
The Analog Input Terminal is also incompatible with the following Master
Units:
3G8B3-SRM0@ CompoBus/S VME Board
C200PC-ISA@2-SRM SYSMAC Board
Specifications The following tables show the ratings and input specifications for the SRT2-
AD04.
General Specifications
PLC Incompatible Master
Units
Compatible Master Units
CS-series, C200HX/
C200HG/ C200HE-(Z)E,
and C200HS
C200HW-SRM21 C200HW-SRM21-V1
CS-series --- CS1W-SRM21
CJ-series --- CJ1W-SRM21
CQM1 CQM1-SRM21 CQM1-SRM21-V1
SRM1 (Integrated with
CPU Unit)
SRM1-C0@
SRM1-C0@-V1
SRM1-C0@-V2
CPM2C-S (Integrated with
CPU Unit)
--- All Units
Item Specification
Model SRT2-AD04
Input points 4, 3, 2, or 1 points (switchable using DIP switch)
(4, 3, 2, or 1 words are allocated to the Master.)
Power supply type Network power supply
Communications power
supply voltage
14 to 26.4 V DC
(Power can be supplied from the communications cable.)
Current consumption Communications power: 100 mA max.
Noise immunity ±1.5 kVp-p with a pulse width of 0.1 to 1 µs and a rise
time of 1 ns (via impulse noise simulator)
Vibration resistance 10 to 55 Hz, 1.0-mm double amplitude
Shock resistance
200 m/s
2
Dielectric strength 500 V AC for 1 minute (between insulated circuits)
Insulation resistance 20 MΩ min. at 250 V DC (between insulated circuits)
Ambient temperature Operating: –10 to 55°C
Storage: –25 to 65°C
Ambient humidity Operating: 25% to 85% (with no condensation)
Storage: 25% to 85% (with no condensation)
Operating environment No corrosive gases
Mounting method M4 screws or 35-mm DIN track mounting
Mounting strength 50 N
Track direction: 10 N
Terminal strength Pulling: 50 N
Weight Approx. 120 g
To Next Page
Loading...
