EasyManua.ls Logo

Omron C200HW-SRM21-V1 - 08-2007 - SRT@-OD@@ (-1) Remote Terminals with 4, 8, or 16 Transistor Outputs

Omron C200HW-SRM21-V1 - 08-2007
423 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
163
Remote Terminals Section 5-1
5-1-3 SRT@-OD@@ (-1) Remote Terminals with 4, 8, or 16 Transistor
Outputs
Specifications The following tables show the ratings and output specifications for the SRT@-
OD@@ (-1).
Ratings
Item Specification
Models SRT1-OD04
SRT1-OD08
SRT1-OD16
SRT1-OD04-1
SRT1-OD08-1
SRT1-OD16-1
SRT2-OD04
SRT2-OD08
SRT2-OD16
SRT2-OD04-1
SRT2-OD08-1
SRT2-OD16-1
Output points SRT@-OD04: 4 points (NPN)
SRT@-OD08: 8 points (NPN)
SRT@-OD16: 16 points (NPN)
SRT@-OD04-1: 4 points (PNP)
SRT@-OD08-1: 8 points (PNP)
SRT@-OD16-1: 16 points (PNP)
Communications mode SRT1-OD@@ (-1): High-speed Communications Mode
SRT2-OD@@ (-1): High-speed Communications Mode
and Long-distance Communications
Mode
Power supply type Multiple power supplies
Communications power
supply voltage
14 to 26.4 V DC
(Power can be supplied from the communications cable)
I/O power supply voltage
20.4 to 26.4 V DC (24 V DC
+10%
/
–15%
)
I/O power supply current SRT@-OD04 and SRT@-OD04-1: 1 A max.
SRT@-OD08 and SRT@-OD08-1: 1 A max.
Current consumption
(See note.)
Communications power: 50 mA max. at 24 V DC
Noise immunity ±1.5 kVp-p with a pulse width of 0.1 to 1 µs and a rise
time of 1 ns (via impulse noise simulator)
Vibration resistance 10 to 55 Hz, 1.0-mm double amplitude
Shock resistance
Malfunction: 200 m/s
2
Dielectric strength 500 V AC (between insulated circuits)
Ambient temperature Operating: 0 to 55°C (with no icing or condensation)
Storage: –20 to 65°C (with no icing or condensation)
Ambient humidity Operating: 35% to 85% (with no condensation)
Storage: 20% to 85% (with no condensation)
Operating environment No corrosive gases
Mounting method M4 screws or 35-mm DIN track mounting
Mounting strength Pulling: 50 N
Tightening: 1.5 N m
Terminal strength Pulling: 50 N
Tightening: 0.6 to 1.18 N m

Table of Contents

Related product manuals