204
Connector Terminals Section 5-2
2. In accordance with the changes in the standards for photoelectric sensors
and proximity sensors, wire colors have been changed. Colors in parenthe-
ses are the old wire colors.
Note 1. The V terminals are all connected internally, as are the G terminals. When
providing I/O power from a communications connector, power can be pro-
vided to sensors from the V and G terminals of the MIL Connector.
2. In accordance with the changes in the standards for photoelectric sensors
and proximity sensors, wire colors have been changed. Colors in parenthe-
ses are the old wire colors.
Compatible External Input Devices and Cables
Models with Sensor Connectors (SRT2-VID08S-1)
The XS8A-0441 and XS8A-0442 Connectors (sold separately) are used to
connect to external input devices. Use the following flowchart to check the
compatibility of external input devices and cables. Refer to 3-4-3 Cable Con-
nector Wiring and Assembly for details on the assembly, wiring, and installa-
tion of cable connectors.
SRT2-VID16ML SRT2-VID16ML-1
Brown (Red)
Black (White)
Blue (Black)
CompoBus/S
communications
CompoBus/S
communications
power supply
I/O power
supply
2-wire sensor
3-wire sensor
2-wire sensor
3-wire sensor
CompoBus/S
communications
CompoBus/S
communications
power supply
I/O power
supply
▲Mark
▲Mark
Sensor
Sensor
Sensor
Sensor
Brown (Red)
Black (White)
Blue (Black)
Brown (White)
Blue (Black)
Brown (White)
Blue (Black)
Locking Lever
To Next Page
Loading...
