52
I/O Response Time Characteristics Section 2-5
Note 1. This is the ON response time for the SRT@-ROC@@
2. This is the OFF response time for the SRT@-ROF@@
Maximum Input Delay
Time for Fiber Amplifier
Communications Unit
• For up to 8 sensors connected:
Maximum ON/OFF data input delay time for unit n = 0.1
× n +1.5 (ms)
• For 9 sensors or more connected:
Maximum ON/OFF data input delay time for unit n = 0.2
× n +1.5 (ms)
SRT2-ND08S 4-point input, 4-point output sensor
terminal
1 ms max. 1.5 ms max. 1.0 ms max. 1.5 ms max.
SRT1-OD08S 8-point output sensor terminal --- --- 0.5 ms max. 1.5 ms max.
SRT2-OD08S 8-point output sensor terminal --- --- 0.5 ms max. 1.5 ms max.
SRT2-ID04CL(-1) 4-point input water-resistant termi-
nal
1.5 ms max. 1.5 ms max. --- ---
SRT2-ID08CL(-1) 8-point input water-resistant termi-
nal
1.5 ms max. 1.5 ms max. --- ---
SRT2-OD04CL(-1) 4-point output water-resistant termi-
nal
--- --- 0.5 ms max. 1.5 ms max.
SRT2-OD08CL(-1) 8-point output water-resistant termi-
nal
--- --- 0.5 ms max. 1.5 ms max.
E3X-SRT21 8-point/16-point input Fiber Ampli-
fier Communications Unit
See below. --- ---
Model Specifications Input specifications Output specifications
ON delay time OFF delay
time
ON delay
time (See
note 1.)
OFF delay
time (See
note 2.)
To Next Page
Loading...
