Omron CJ1G/H-CPU series User Manual

156
Programming Devices Section 3-3
C200H-PRO27-E Programming Console
Note The cassette jacks are not used with CJ-series CPU Units.
3-3-3 CX-Programmer
Item Details
Applicable PLC CS/CJ-series (See note 1.), CV-series, C200HX/HG/HE (-Z), C200HS, CQM1,
CPM1, CPM1A, SRM1, C1000H/2000H
Operating system Microsoft Windows 95 (See note 2.), 98, Me, 2000, XP, or NT 4.0
Personal computer DOS version, IBM PC/AT or compatible
Connection method CPU Unit’s peripheral port or built-in RS-232C port
Communications
protocol with PLC
Peripheral bus or Host Link
Offline operation Programming, I/O memory editing, creating I/O tables, setting PLC parameters,
printing, program changing
Online operation Transmitting, referencing, monitoring, creating I/O tables, setting PLC parame-
ters
Basic functions 1.Programming: Creates and edits ladder programs and mnemonic programs for
the applicable PLC.
2.Creating and referencing I/O tables.
3.Changing the CPU Unit operating mode.
4.Transferring: Transfers programs, I/O memory data, I/O tables, PLC Setup, and
I/O comments between the personal computer and the CPU Unit.
5.Program execution monitoring: Monitors I/O status/present values on ladder
displays, I/O status/present values on mnemonic displays, and present values on
I/O memory displays
PRO27
PROGRAMMING CONSOLE
PROGRAMMING CONSOLE
EAR MIC
RUN
MONITOR
PROGRAM
LCD area
Mode selector switch
Operation keys (Install
the CS1W-KS001-E
Key Sheet
Casette jacks (See note.)
CS1W-CN224 (Cable length: 2.0 m)
CS1W-CN624 (Cable length: 6.0 m)
C200H-PRO27-E
Connect the CPU Unit to the Programming Console with the following cables.
CS1W-CN224 (Cable length: 2.0 m)
CS1W-CN624 (Cable length: 6.0 m)

Omron CJ1G/H-CPU series Specifications

General

Brand	Omron
Model	CJ1G/H-CPU series
Category	Controller
Language	English