5
Introduction
CJ-series PROFIBUS Slave Unit Operation Manual for NJ-series CPU Unit (W510)
CJ-series PROFIBUS Slave Units Operation Manual for NJ-series
CPU Unit (Cat. No. W510) (This Manual)
Section Description
Section 1
Features and System Configuration
This section provides a brief description of PROFIBUS-P. It also addresses the
overall specification and the communication performance of the CJ1W-PRT21
PROFIBUS-DP Slave Unit.
Section 2
Nomenclature and Installation
This section describes the nomenclature, functionality and installation of the PROFI-
BUS Slave Unit.
Section 3
Data Exchange with the CPU Unit
This section describes the data interface and data exchange between the NJ-series
CPU and the CJ1W-PRT21 PROFIBUS-DP Slave Unit.
Section 4
Troubleshooting and Maintenance
This section describes the troubleshooting procedure, event logs and maintenance
procedure for the CJ1W-PRT21 PROFIBUS Slave Unit.
Appendices ---
SmartSlice GRT1-Series PROFIBUS Communication Unit Operation
Manual (Cat. No. W04E)
Section Description
Section 1
Features and Specifications
This section provides an introductory overview of the GRT1 series SmartSlice I/O Units and
the GRT1-PRT PROFIBUS, Communication Unit, its functions and how to setup and
configure it for a PROFIBUS network.
Section 2
Installation and Wiring
This section contains the procedures for setting up the PROFIBUS network. It also
describes installing and wiring the Communication Unit as well as the GRT1-series
SmartSlice I/O Units.
Section 3
Setup and Operation
This section describes the operational aspects of the GRT1-PRT and the SmartSlice
I/O system.
Section 4
Troubleshooting and Maintenance
This section describes the troubleshooting procedures and maintenance operations
for the PROFIBUS Communication Unit.
Appendices
The appendices describe the following:
PROFIBUS Technology
Slave Diagnostics Messages
Explicit Messages
SmartSlice GRT1-Series Slice I/O Units Operation Manual (Cat. No.
W455)
Section Description
Section 1
Available Units and Features
This section describes the features of GRT1-series Slice I/O Units and lists the avail-
able Units.
Section 2
Shared Specifications and Func-
tions
This section describes the specifications and functions that are shared by all of the
Slice I/O Units.
Section 3
Installation and Wiring
This section provides information on installing and wiring the Slice I/O Units.
Section 4
Digital I/O Units
This section provides the specifications and shows the components, terminal
arrangements, wiring diagrams and dimensions for the Digital I/O Units.
Section 5
Analog I/O Units
This section provides the information required to operate Analog Input Units and
Analog Output Units.
Section 6
Temperature Input Units
This section provides the information required to operate Temperature Input Units.
Section 7
Counter Units and Positioning Unit
This section provides the information required to operate Counter Units and the Posi-
tioning Unit.
To Next Page
Loading...
