Omron CJ2 Series User Manual

10. Appendix 2 Setting the Tag Data Links Using the Software
47
10.4. Setting Up the Network Using the
Software
Set the tag data links for EtherNet/IP using the
software.
↓
10.4.1. Connecting Online and
Uploading Configuration
Start the Network Configurator, connect online with
the Controller, and upload the network configuration.
↓
10.4.2. Setting the Tags and Tag Sets
Set the tags and tag sets of the send area and
receive area of the PLC.
↓
10.4.3. Importing the File, Registering
the Tags and Setting the Tag
Sets
Import the CSV file that was saved, register tags of
the originator's send area and receive area, and set
the tag sets.
↓
10.4.4. Setting the Connection
Associate the tags of the target device with the tags
of the originator.
↓
10.4..5 Transferring the Tag Data Link
Parameters
Transfer the set tag data link parameters to the
Controller.
↓
7.5. Checking EtherNet/IP
Communications
Confirm that the EtherNet/IP tag data links are
operated normally.
↓
7.5.1 Checking the Connection Status
Check the connection status of EtherNet/IP.
↓
7.5.2 Checking the Data that are Sent
and Received
Confirm that the correct data are sent and received.

Omron CJ2 Series Specifications

General

CPU Units	CJ2H, CJ2M
Data Memory Capacity	32K words (CJ2M), 128K words (CJ2H)
EtherNet/IP	Yes (some models)
I/O Capacity	Up to 2, 560 I/O points
Communication Ports	Ethernet, RS-232C
Expansion Units	Up to 40 expansion units
Programming Languages	Ladder diagram, Structured text, Function block diagram
Instruction Execution Speed	0.04 μs (basic instructions)
Serial Ports	1 (RS-232C)
Expansion Slots	Up to 10 (CJ2H)
Operating Temperature	0 to 55°C
Storage Temperature	-25°C to 75°C
Power Supply Voltage	100 to 240 VAC, 24 VDC