Omron CJ2H-CPU6*-EIP Series - Page 18

7
．
EtherNet/IP Connection Procedure
15
5
Connect Switching hub and
Ethernet connector on Sensor
Controller with a LAN cable.
Connect 24 VDC power supply
(for Switching hub) to Switching
hub.
LAN cable
24 VDC power supply
6
Connect 24 VDC power supply
to 24 V input terminal block.
*For details on specifications of
24 VDC power supply available
for Sensor Controller, refer to
the Displacement
SensorZW-7000 series
Confocal Fiber Type
Displacement Sensor User’s
Manual (Cat. No. Z362).
24 VDC power supply