Omron CJ2H-CPU6*-EIP Series - Page 44

7
．
EtherNet/IP Connection Procedure
41
4
The Edit Tags Dialog Box is
displayed.
Select the In - Consume Tab
and click New.
Here, register a tag for the area
where the node 1 consumes
data from the node 50.
5
The Edit Tag Dialog Box is
displayed. Enter the following
values of the parameters.
Name: D10100 (Start address
of the input data to node 1)
Size: 56 (Byte)
After entering, click Regist.
6
The Edit Tag Dialog Box is
displayed again. Click Close.