Omron CJ2H-CPU6*-EIP Series - Page 45

7
．
EtherNet/IP Connection Procedure
42
7
Select the Out - Produce Tab
and click New.
Here, register a tag for the area
where the node 1 produces data
to the node 50.
8
The Edit Tag Dialog Box is
displayed. Enter the following
values of the parameters.
Name: D10000 (Start address
of the output data from node
1)
Size: 24 (Byte)
After entering, click Regist.
9
The Edit Tag Dialog Box is
displayed again. Click Close.